The IP-S3 mobile mapping system offers high density, high precision, point clouds combined with high resolution panoramas from a system that is smaller, lighter and easier to handle.
IP-S3’s positioning system is an integration of an Inertial Measurement Unit (IMU), GNSS receiver (GPS and GLONASS) and a vehicle odometer. It provides precise positioning and attitude in a dynamic environment.
The rotating LiDAR sensor captures the environment with a rate of 700,000 pulses per second. During each rotation, the 32 internal lasers cover the full 360 degrees around the system, each from a slightly different viewing angle. This minimizes gaps in the point cloud which arise from obstacles or dead-angles and removes the need to install multiple scanners.
IP-S3’s six-lens digital camera system provides 360 degree high resolution spherical images that allow for easy feature recognition.
Mobile Master Office software handles all post processing trajectories and geo-referencing scans and images.
Integrated turnkey solution
Ultra compact design
Multiple lasers minimize scanning shades
Unparalleled ease of use
Full integration of cloud and images
Operating Temperature Range 0°C to 45°C (32°F to 113°F)
Storage Temperature Range -30°C to 60°C (-22°F to 140°F)
Calibration Topcon calibrated for high precision
Number of Channels* 226 universal channels, GPS, L1/L2, and GLONASS
Physical and Environmental
Dimensions* 260 mm (W) x 160 mm (D) x 121 mm (H)
Dimensions** 300 mm (W) x 500 mm (D) x 600 mm (H)
Weight 3.0 kg (6.6 lb)
Including sensors: 18 kg (39.6 lb)
Camera Unit*** CCD camera (6 pcs.)
*P-S3 timing Unit
Timing Resolution 10 nsec
Gyro Bias Stability 1º/hr
Acceleration Bias Stability* 7.5 mg
Measurement Rate 700,000 points/sec
Range** 100 m @ 100% reflectivity, 70 m typical
Maximum Resolution*** 8,000 × 4,000 pixels
Input Voltage 9V to 36V
Power Consumption 60W
Continuous Surveying Time* 8 hours
Surface Accuracy** 10 mm on road surface (1 sigma)
*(results in approx. 1 TB of data)
**Plane fitting results on flat road surface